About Us

Our Organization:

Grephil International Limited Was Incorporated on October 5, 1995, by the Corporate Affairs Commission.

To Provide Engineering, Procurement, Construction, And Manufacturing Services in The Oil and Gas Midstream, Upstream, And Downstream Sectors.

Strategically located at Kilometre 19, Aba-Port-Harcourt Expressway, Oyigbo, Port-Harcourt, Rivers State, Nigeria in proximity to the Oil and Gas Industry region, the company is situated in an expanse of land measuring 26, 857.09 square meters.

The facility houses the Administrative Block, Gigantic Warehouses, massive stock of Static Equipment second-to-none in Nigeria, laydown Areas, and the Factory for the manufacturing of Threaded bars, Stud Bolts, Nuts, and Washers; Electro-Plating/PTFE Coating, Gaskets, Fittings, Flanges, Industrial Fabrications, Sand/Abrasive Blasting, and Calibration of Valves, etc.

Our Roadmap to Nigerian Content Development:

· Partnership With Technically Approved Manufacturers and Products (TAMAP) Vendors.

· Expansion of Our In-country Stock Base and Services.

· Domiciliation of Our OEM Products In-country.

· Commissioning Of Grephil Manufacturing Facility.

Our approach:

Our Vision

To Become the Leading Service Provider to The Oil and Gas Industry While Maintaining a Culture of Excellence and Due Diligence to Corporate Values.

Our Mission

To Contribute Significantly Towards Developing Local Manufacturing Capability and Technical Superiority in Oilfield-related Products, For National Economic Growth, And Global Sustainability.

Our Core Values
Integrity: Honest, Fair, And Show of Equality While Engaging Service for Our Customer.
Commitment: Dedicated to Meeting and Exceeding the Needs of Our Customers.
Innovation: Look Beyond Challenges to Source New Ideas/Inventions to Meet Opportunities.
Leadership: Encourage Strategic and Purpose-driven Leadership.
Collaborative Work While Meeting the Needs of The Customer.

Our Quality

We are committed to Total Quality Management Concept; to make certain the job is done right the first time and achieve higher productivity. We use our years of experience, specialized equipment, documented procedures, and continuous employee training to ensure that only the finest output is achieved at all times. Our quality system is approved to ISO 9001:2015.

Our Safety

Strict adherence to Health, Safety & Environment is our Watchword! We go extra miles to implement, facilitate and effect it, no matter how much it costs.

Our Strategy

Certifications & Awards

ISO Certifications

Grephil International has established a certified Integrated Management System to the requirements of ISO 45001:2018 (Occupational health & safety MS), ISO 9001:2015 (Quality MS), and ISO 14001:2015 (Environment MS) with the goal of:

Continually improving her products and services to enhance customer satisfaction.
Protection of the environment (through waste, noise, pollution, and natural resources sustainable management).
Prevention of injury and ill health/risk.

Industry Certifications

Membership Certifications

Corporate Awards: Shell Supplier of Year Award – 2012, 2013 and 2014, consecutively.

Factory Commissioning

Commissioning of Grephil Manufacturing Facility

A great milestone was achieved by Grephil International Limited on The 8th Of August 2022 when the factory was commissioned by the Nigerian Content Development and Monitoring Board (NCDMB) under the leadership of the Executive Secretary, Engr. Simbi Kesiye Wabote, in a team of the captains of the industry for the;

a). Manufacturing of;

– Bolts, Nuts and Washers (PTFE Coating, Electroplating, Zinc-Nickel, Stainless Steel, etc.).

– Pipe Fittings – Split Tees, Sole Sleeves, and Pipe Clamps and Spools.

– Gaskets and Shrinkable Sleeves.

– Processing of Semi-Finished Flanges and Fittings.

b). Fabrication/Rehabilitation and Upgrade of equipment in the oil and gas industry.

c). Calibration of Valves.

d). Abrasive/Grit Blasting.

Policy

Nigerian Content Policy

Grephil International Limited has fully embraced the Nigerian Content initiative and is committed to the development of the local content policy.

To this effect, the company is incorporating the plan into its business as part of her immense contribution to the sustainable development of Nigeria and project bearing communities in particular. Therefore, in carrying out our activities, we have established the following principles;

The Nigerian Content Policy is all about maximizing the use of Nigerian owned facilities, thus assisting to develop indigenous service providers and enable them to attain excellence.
The Company shall undertake research and technology with a portion of our gross profits to finding and developing local substitutes for a majority of our products currently sourced overseas.
The Company shall extensively ensure protection of environment respect for human and social rights of employees and contribution to local economic development.
The Company shall encourage local supplies for the purchase of items used in the course of the day-to-day running of the company, except where such items cannot be procured in country.

Quality Policy

In our service delivery, we are focused on quality, innovative, and cutting-edge solutions tailored to meet the present-day challenges of the oil and gas industry. We are committed to ensure adherence to and satisfaction of customers, other relevant interested parties, all applicable requirements; and the continual improvement of the QMS by constantly reviewing this policy for suitability during management review meetings.

This statement of our commitment is appropriate to the scope and nature of our operations defined in the Scope of our Integrated Management System (IMS); the Context of our Organization as detailed in our Apex Manual, Context of the Organizations Procedure, Internal & External Issue Logs, and Needs & Expectations of our relevant Interested Parties; and also supports our strategic direction as detailed in the Business Plan.

The Policy statement provides a framework for the establishment and reviewing of the quality objectives which shall be developed by each process head and approved by top management.

This is communicated and understood by all personnel and applied within the organization, available to relevant interested parties as appropriate to our organization and maintained as document information.

Health, Safety & Environment Policy

We are committed to the protection of the environment; including prevention of injury and ill health and risks; pollutions such as waste and noise management, and other specific commitments such as sustainable resource use by managing scarce resource like water, energy and land in an environmentally sensitive manner; climate change mitigation & adaptation and the protection of biodiversity & ecosystems by looking for ways to minimize risk and protect our employees and the communities in which we operate by employing clean and safe technologies, and operating procedures, as well as being prepared for emergencies.

We shall strive to minimize environmental aspects and occupational health hazards through the use of safe chemicals and considerations to the environment. We shall minimize the amount of waste generated and will ensure safe handling and disposal of waste; the continual improvement of the EMS and OH&S performance by constantly reviewing this policy for suitability during management review meetings. We shall make this policy available to relevant interested parties; and also adhere to all applicable obligations and regulations.

This policy stated above is appropriate to the scope and nature of our operations defined in the Scope of Integrated Management (IMS); OH&S hazards/risks as contained in the Hazard Registers, the Context of our Organization as detailed in our Apex Manual, Context of the Organizations Procedure, Internal & External Issue Logs, and Needs & Expectations of our relevant Interested Parties; and the environmental impacts of our activities, products and services as contained in the Environmental Aspects and Impacts Register.

This statement provides a framework for establishing and reviewing our HSE objective which shall be developed by each process head and approved by top management.